Will it work? I’m looking at upgrading my 24 volt growatt system to the EG4 6000xp. I understand I can series the two 24v batteries to make one 48v battery, but the communication won’t work. So I’ll need to select lead acid battery and enter the parameters in manually, which is fine, but it won’t show state of charge, just voltage, correct? Is there a way I can determine state of charge without hooking up a laptop to the batteries?
Also the the two 24 volt batteries have a 100amp bms, allowing me to pull about 2500 watts. In series I should be able to pull 5000 watts. But it’s a 6000 watt inverter. Will it work, as long as I don’t pull more than 5000 watts or will it give some kind of error?
I don’t have the EG4 6000xp yet, just trying to make sure it’ll work before I buy it. Thanks.
Also the the two 24 volt batteries have a 100amp bms, allowing me to pull about 2500 watts. In series I should be able to pull 5000 watts. But it’s a 6000 watt inverter. Will it work, as long as I don’t pull more than 5000 watts or will it give some kind of error?
I don’t have the EG4 6000xp yet, just trying to make sure it’ll work before I buy it. Thanks.