mikeyoungvcu89
New Member
- Joined
- Jul 5, 2022
- Messages
- 44
I'm wondering how people have connected a generator or utility power to these inverters. I only see one Line, a N and a ground for the input..however, the manual talks about line 1 and line 2 (Black and Red). It made me wonder if they intended to connect the 2 separate hot lines from a PB 30 but since the manual also says the input is 120-150v I don't think so. My generator is Neutral/Ground bonded. I dont have utility power, its totally off-grid. My current inverter which I'm replacing with the EG4 feeds the small panel with no main breaker and one neutral/ground bar. I have no 240v loads just several 15a 120v circuits.
Help I dont think I installed the old system optimally and I want to make sure I install the new one correctly.
Help I dont think I installed the old system optimally and I want to make sure I install the new one correctly.