Equilization profile won't go to zero

[Greenan_Energy]

Hello,

So I've set up the profile below for my 24v battery bank. I've tried to set the equilization voltage to zero but it only goes as low as 18V. I can see that the automatic equilization is disabled. Is that enough or does the equilization voltage need to be at 0V.

Thank you for any help

 

[MrNatural22]

If the equiization is disabled it shouldn’t operate. Voltage setting doesn’t matter if it’s set to 0 eq time or disabled. ?

 

[Mr.Michael]

Agree with MrNatural, since the actual equilization is disabled it doesn't matter what voltage is set. Likely the software guys set a an allowed range from X to Y and you just can't set anything outside that range. You should be OK as is.