here's my current sytem
diysolarforum.com
I'm planning to add:
I already confirmed VOC is sufficient for the 4series 1kw array and amperage is just fine at ~13.
Is it as simple as wiring the second midnite SCC as a slave, adding comm cables between the two, programming all the limits the same and turning it on?
residential DIY grid-assist install -- 2kw roof array + Growatt 3k 24v + 24v chins batt bank
hey everyone, I am starting this thread to document my progress on installation. so, here we go. I will post updates as I complete work. I'm in michigan. Suncalc shows 208deg azimuth and 28deg tilt. PVwatts estimating peak production of 6500wh per day. Core components: 2kw PV array - 8x...
diysolarforum.com
I'm planning to add:
- 1x Midnite classic 200 SCC
- 1x 24v CHINS 100AH in parallel with the other two for a single bank total of 300ah
- 4x 250w panels for additional 1kw (same panels as my current 2kw 4s2p array)
I already confirmed VOC is sufficient for the 4series 1kw array and amperage is just fine at ~13.
Is it as simple as wiring the second midnite SCC as a slave, adding comm cables between the two, programming all the limits the same and turning it on?
Last edited:
