Just getting started. A friend passed away and his wife gave me all his solar project toys. I've always be interested in doing this and he an I talked a lot about it.
My question is what matches, what do I keep or divide into groups so I don't burn anything up during the learning process. I'm still searching the forum and reading all the beginners post.
Right now the goal is to learn. I'm not trying to wire a cabin or camper at this point. This is the opportunity for me to learn theory, hookup, wiring and results. So I'm open to what to keep and what to get rid of.
Inventory includes:
2 - Renogy 100W monocrystalline solar panels:
Maximum Power - 100 W
Open Circuit Voltage (Voc) - 24.3 V
Short Circuit Current (Isc) - 2 x 2.73 A
Maximum Power Voltage (Vmp) - 20.3 V
Maximum Power Current (Imp) - 2 x 2.47 A
(Although the sticker on the panels read a little different)
1 - EPEVER MPPT Charge Controller W/Remoter Meter
Rated Charge Current: 30A
Rated Load Current: 20A
Max PV Open Circuit Voltage: 150V / 138V
Max PV Input Power: 390W (12v battery)
1 - Victron MPPT 100/30
Maximum PV voltage - 100V
Maximum - 30A
Suitable battery voltages - 12V/24V
Minimum Fuse Rating - 35A
Maximum Battery Fuse Rating - 40A
1 - Morningstar - ProStar PS-30 Charge Controller
1 - Xantrex PROwatt SW Sine Wave Inverter (PROwatt SW100) W/Remote Meter
2 - LiTime 12 50Ah LiFePO4 Batteries
1 - LiTime 14.6V 10A LiFePO4 Battery Charger
Thanks
My question is what matches, what do I keep or divide into groups so I don't burn anything up during the learning process. I'm still searching the forum and reading all the beginners post.
Right now the goal is to learn. I'm not trying to wire a cabin or camper at this point. This is the opportunity for me to learn theory, hookup, wiring and results. So I'm open to what to keep and what to get rid of.
Inventory includes:
2 - Renogy 100W monocrystalline solar panels:
Maximum Power - 100 W
Open Circuit Voltage (Voc) - 24.3 V
Short Circuit Current (Isc) - 2 x 2.73 A
Maximum Power Voltage (Vmp) - 20.3 V
Maximum Power Current (Imp) - 2 x 2.47 A
(Although the sticker on the panels read a little different)
1 - EPEVER MPPT Charge Controller W/Remoter Meter
Rated Charge Current: 30A
Rated Load Current: 20A
Max PV Open Circuit Voltage: 150V / 138V
Max PV Input Power: 390W (12v battery)
1 - Victron MPPT 100/30
Maximum PV voltage - 100V
Maximum - 30A
Suitable battery voltages - 12V/24V
Minimum Fuse Rating - 35A
Maximum Battery Fuse Rating - 40A
1 - Morningstar - ProStar PS-30 Charge Controller
1 - Xantrex PROwatt SW Sine Wave Inverter (PROwatt SW100) W/Remote Meter
2 - LiTime 12 50Ah LiFePO4 Batteries
1 - LiTime 14.6V 10A LiFePO4 Battery Charger
Thanks