how to bridge input neutral to output neutral

[thepilot]

How do I bridge the input neutral and output neutral? Is there a certain gauge wire that needs to be used?
Thank you!

 

[Supervstech]

More info needed...
What size inverter? What brand?
Where are you bridging?

 

[thepilot]

trying to install mpp solar all in one unit PIP-812LV 800W 12V in an rv....I contacted Ian, the seller, with another question and he recommended that I bridge ac input neutral to the ac output neutral. I don't know how to do this?
Thank you for your reply

 

[Supervstech]

It sounds like he is suggesting you tie a jumper between the neutral terminals on your inverter.

 

[thepilot]

Is this just a wire between the two terminals? Is there a specific gauge or type of wire??

 

[Supervstech]

Since this is just an 800 watt inverter, #14 should be sufficient... I do not like installing multiple wires under lug screws, so perhaps making a pigtail so only a single wire is under each screw, and wire nuts tie the conductors together.

 

[thepilot]

I am so grateful for your responses and advice!!! I was stuck here, but your help will let me continue!! Thank you so much for taking the time to explain this to me!!