John Frum
Tell me your problems
- Joined
- Nov 30, 2019
- Messages
- 15,233
@Watch Me Build has a fet based bms.
It may have failed closed.
It may have failed closed.
JBD bms cell overcharge issue.
Ok so one of my cells in a diy 280ah LifePo4 will hit 3.6v while another is at 3.55 and 2 others are in the upper 3.4s. I realize I need to top balance these cells again, but am living off grid and this is my only power source, so that's not an option at the moment. I am hooked into an...
diysolarforum.com