Pauhar1
New Member
I have already installed three 100ah batteries to the battery bank to bring the total to 500 ah. I now need to install the inverter. My questions are:
1. Does anyone know how Lance factory wires their inverters.
2. Is there a way to wire the inverter o the loads and bypass the converter so I don’t have that “current loop”
I have purchased a transfer switch and a monitor and intend to wire the inverter and generator into the transfer switch then come out of this switch to the factory shore power/generator transfer switch like it is now. That way the generator will disconnect the inverter and shore power will disconnect the generator.
Any thoughts from the gallery would be appreciated!!!
1. Does anyone know how Lance factory wires their inverters.
2. Is there a way to wire the inverter o the loads and bypass the converter so I don’t have that “current loop”
I have purchased a transfer switch and a monitor and intend to wire the inverter and generator into the transfer switch then come out of this switch to the factory shore power/generator transfer switch like it is now. That way the generator will disconnect the inverter and shore power will disconnect the generator.
Any thoughts from the gallery would be appreciated!!!
Last edited: