Is my Tracer voltage is correct?

[RaVaeL]

Hi,
I have 3 375W panels: https://drive.google.com/file/d/1M34QlnQKalyOdh49BPWTR5LiCtojcFtK/view connected to Tracer10415AN.
I am concerned about the voltage from the panels. Should it be more than 102V? For example, I am attach below the highest charge I've been able to get (usually it's 50-60A and 14.0V - I set max 14V standard as boost) and the charge on a cloudy day. Is this ok, or should it be more? If it should be more, then I will take it upon myself to check every connection between the panels.

 

[mopat]

seems fine

 

[MichaelK]

The Vmp for your panels is supposed to be 32.2V, so three in series would be 32.2 X 3 = 96.6Vmp, so they are actually a bit high. You have to remember that your panel voltage will vary significantly, based on the temperature, the load applied, and the battery's state of charge.

 

[RaVaeL]

Thanks so much for answers!