Grateful.dead
New Member
Hello! First time post a newbie to DIY batteries so take it easy on me ? So recently purchased Eve LF280k for a 12v battery and started balancing a couple days ago. Charging at 3.65v and 9.8-10a with a cheap Amazon power supply. I was using the cheap alligator clamps with 16g wire and wasn’t getting full amps so wired some 12g wire with ring terminals to get some more power. My batteries were at about 3.22-3.24v. I haven’t noticed much change in voltage after almost 30+ hours. All are ranging from 3.34-3.37. I noticed when I tighten the bolt on the studs that has the ring terminals it goes to CC and if I lightly loosen them it goes to CV. Am I doing something wrong here? Thanks in advance been slowly learning and trying to troubleshoot the issue but would love some input! Thanks
Attachments
Last edited: