thedevilsgoldenfiddle
New Member
...sigh...
(big inhale)
...sigh...
Okay...so im building my first Dyson Sphere...
kidding/not kidding
Its not going swimmingly...
12v 100ah lithium battery
2200w inverter
40amp charge controller
200w of panels
I bought the victron 225amp fuse/holder to put between the battery and inverter like a few youtube videos suggest. But that fuse holder supposedly can only do 1AWG lugs. Is that true? I cant seem to find an amperage wire chart for continuous loads(not that i need a continuous 200amp load with a small set up). I just want everything to check out safely but i seem to be running into bottlenecks.
Upgrade to 24v system? Or can someone tell me safe size wires for my setup? Dont i need larger than 1awg wire/lug between battery and inverter? 2/0?
Thanks in advance
(big inhale)
...sigh...
Okay...so im building my first Dyson Sphere...
kidding/not kidding
Its not going swimmingly...
12v 100ah lithium battery
2200w inverter
40amp charge controller
200w of panels
I bought the victron 225amp fuse/holder to put between the battery and inverter like a few youtube videos suggest. But that fuse holder supposedly can only do 1AWG lugs. Is that true? I cant seem to find an amperage wire chart for continuous loads(not that i need a continuous 200amp load with a small set up). I just want everything to check out safely but i seem to be running into bottlenecks.
Upgrade to 24v system? Or can someone tell me safe size wires for my setup? Dont i need larger than 1awg wire/lug between battery and inverter? 2/0?
Thanks in advance