I have an odd situation with my JBD BMS (I think this is the cause).
The BMS seems to activate when I connect the cell monitoring harness (I measure 13.5V between the battery terminals, and at the B- and the C-. But when I connect the battery to the circuit, I do not get any voltage or current through - is there something I am missing with the setup?
Thanks!
The BMS seems to activate when I connect the cell monitoring harness (I measure 13.5V between the battery terminals, and at the B- and the C-. But when I connect the battery to the circuit, I do not get any voltage or current through - is there something I am missing with the setup?
Thanks!