davecason
New Member
Hi,
I'm hooking back up a battery pack to a KISAE 2000W Inverter/Charger and I have a question about "tweaking" the charging settings.
The batteries are four (4) standard LiFePO4 cells from Basen in China. They are:
3.2 V LiFePo4 Cell
Capacity: 272 Ah
Voltage: 3.24 V
IR: 0.12 m Ohm
So there's the 4 in series with the buss bars all ready to go
I'm sending the output of the battery pack to a Kisae BIC1220080 but I want to play with the charging feature of the KISAE. I don't have a BMS on the system right now so I'd be relying on the KISAE to charge up the battery pack only. I think the best option is to use the PGM mode on he battery type and set it for :
KISAE BIC1220080 Manual - Page 15
Batt Low Disconnect: 11.8V
Batt Low Warn: 12.0V
Batt Low Recovery: 12.1V
Buzzer: OFF
AC Charger; ON
Batt Type: PGM
Bulk Current; 80 A (default)
Bulk / Absorb Voltage: 13.8V ?
Absorb to Float Current: 8A (default)
Float Voltage: 13.4V
Recharge Voltage: 13.2 ?
Batt Temp: NOR (default) 15-35C
What do you think about those manual settings ....... any suggestions? And thanks for reading this post too !
Cheers'
Dave
I'm hooking back up a battery pack to a KISAE 2000W Inverter/Charger and I have a question about "tweaking" the charging settings.
The batteries are four (4) standard LiFePO4 cells from Basen in China. They are:
3.2 V LiFePo4 Cell
Capacity: 272 Ah
Voltage: 3.24 V
IR: 0.12 m Ohm
So there's the 4 in series with the buss bars all ready to go
I'm sending the output of the battery pack to a Kisae BIC1220080 but I want to play with the charging feature of the KISAE. I don't have a BMS on the system right now so I'd be relying on the KISAE to charge up the battery pack only. I think the best option is to use the PGM mode on he battery type and set it for :
KISAE BIC1220080 Manual - Page 15
Batt Low Disconnect: 11.8V
Batt Low Warn: 12.0V
Batt Low Recovery: 12.1V
Buzzer: OFF
AC Charger; ON
Batt Type: PGM
Bulk Current; 80 A (default)
Bulk / Absorb Voltage: 13.8V ?
Absorb to Float Current: 8A (default)
Float Voltage: 13.4V
Recharge Voltage: 13.2 ?
Batt Temp: NOR (default) 15-35C
What do you think about those manual settings ....... any suggestions? And thanks for reading this post too !
Cheers'
Dave