S Suijkerbuijk I cannot be held responsible for this information. Joined Jul 3, 2021 Messages 467 Location The Netherlands Today at 12:39 AM #76 Checkthisout said: Ok. That makes more sense. I would just glue it in or use a soldering iron to distort the plastic a little so it stays in assuming the issue is with the female portion on the board and not the male part of the plug. Click to expand... No its not about the jumper. That is not the topic starter . That is somebody else who had that problem.
Checkthisout said: Ok. That makes more sense. I would just glue it in or use a soldering iron to distort the plastic a little so it stays in assuming the issue is with the female portion on the board and not the male part of the plug. Click to expand... No its not about the jumper. That is not the topic starter . That is somebody else who had that problem.
