Multiplies II Setup

[caymaanedge]

First trial run with my new Multiplus II 50amp inverter. Took a couple screen shots to review data. Plugged into 50amp shore power.
Inverter/charger is setup for max charging of 120 amps.

Is this telling me I am only getting about 20amp of shore power and only 3 amps for charging?

 

[BentleyJ]

What I see is the difference between L1 input and L1 output is 369Watts which not surprisingly is the same amount of watts that are going into your battery. 13.2 V x 26A = 343Watts. (not sure where you are seeing 3A, one screen shot shows 25.9A and the other 26A.)
As to why the battery charging current is only 26A vs. 120 may have something to do with charge voltage settings that work together with amperage settings. What is the amp hr rating of your battery? 120A charging is fairly high implying the battery bank should be 300Ah or more.

 

[caymaanedge]

680ah battery bank
What about the L1 and L2 input amperage of only 18.5amps?
I did realize my electric hot water heater was on now that it’s powered all the time. Will need to keep an eye on that setting.
Thank you

 

[HRTKD]

I see 26 amps going to the battery. The Multiplus will throttle back the battery charge based on how much the AC out is consuming. The AC out gets priority.