caymaanedge
New Member
- Joined
- Jul 19, 2020
- Messages
- 124
Going from a Magnum MS2812 to the Victron Multiplus II 2x120v.
It appears that currently L1 runs to the inverter and then to part of the 120v split us panel, and L2 goes directly to the second part of the split bus 120v panel. So basically only items on the L1 side of the 120v panel will work if not plugged into shore power or on inverter.
So…do I need to run new wiring from the existing transfer switch to the Multiplus to accommodate L1 & L2 as well as from the inverter to the 120v panel? TIA
It appears that currently L1 runs to the inverter and then to part of the 120v split us panel, and L2 goes directly to the second part of the split bus 120v panel. So basically only items on the L1 side of the 120v panel will work if not plugged into shore power or on inverter.
So…do I need to run new wiring from the existing transfer switch to the Multiplus to accommodate L1 & L2 as well as from the inverter to the 120v panel? TIA