Hello,
48 VDC LifePo4 batteries.
If you had two or more batteries wired to a bus bar and all the batteries were within 0.11 volt of each other, to place the batteries in service, would you turn each battery on or charge each battery until the voltage difference was less than 0.05 (or some small value) volts before placing the batteries in service?
48 VDC LifePo4 batteries.
If you had two or more batteries wired to a bus bar and all the batteries were within 0.11 volt of each other, to place the batteries in service, would you turn each battery on or charge each battery until the voltage difference was less than 0.05 (or some small value) volts before placing the batteries in service?