John Frum
Tell me your problems
- Joined
- Nov 30, 2019
- Messages
- 15,233
I would like to suggest an optimization on your lynx distributor idea.
This video shows how to convert the less expensive lynx power-in to use fuses.
I suggest convert 3 of the 4 positions to be fused.
Hook up the battery to the un-fused position because it has a class-t fuse.
Leave the negative backplane connection covered with its insulated cover.
You can use the positive backplane to connect your shunt power connector, make sure that connection has an inline fuse.
This way you minimize the chance of a short across the backplane.
This video shows how to convert the less expensive lynx power-in to use fuses.
Hook up the battery to the un-fused position because it has a class-t fuse.
Leave the negative backplane connection covered with its insulated cover.
You can use the positive backplane to connect your shunt power connector, make sure that connection has an inline fuse.
This way you minimize the chance of a short across the backplane.