RichardMole
New Member
- Joined
- Dec 6, 2022
- Messages
- 15
I have a Solis RAI-3k-48ES-5G inverter connected to batteries and a separate PV panel inverter (Solar Edge). I am trying to monitor the power flows around the Solis inverter using the SolisCloud app and/or the SolisCloud website. (They both show the same data).
Problems are:
- Power flow to/from grid is back to front (Import shown as export, &vv). (Yes, the CT on the grid connection is the right way round)
- Today Yield from PV is always shown as zero (though the Solis inverter is reading this info correctly from the CT on the connection to the PV inverter)
- (Power to/from battery appears to show correctly)
- Power to/from house is always wrong because it is not measured directly but is calculated from the other 3.
Does anyone else have these problems with SolisCloud?
Does anyone know what to do to correct them? I have opened a support ticket with Solis but have had little back from them sofar.
Problems are:
- Power flow to/from grid is back to front (Import shown as export, &vv). (Yes, the CT on the grid connection is the right way round)
- Today Yield from PV is always shown as zero (though the Solis inverter is reading this info correctly from the CT on the connection to the PV inverter)
- (Power to/from battery appears to show correctly)
- Power to/from house is always wrong because it is not measured directly but is calculated from the other 3.
Does anyone else have these problems with SolisCloud?
Does anyone know what to do to correct them? I have opened a support ticket with Solis but have had little back from them sofar.