sidraja999
New Member
Hello,
I am using the Tigo CCA unit and trigger the rapid shutdown feature by disconnecting the power to the CCA.
I want to setup an automated way of engaging the rapid shutdown feature when a ground fault happens.
I am planning to use a normally open switch that senses for current on the ground wire and then sends an output signal. I want to connect the output signal wire to the AUX port on the CCA.
Is there a current sensor switch that can detect DC current on the ground wire and then send an output signal? My amp level is about 12 amps but voltage can be up to 600 volts.
Thanks
I am using the Tigo CCA unit and trigger the rapid shutdown feature by disconnecting the power to the CCA.
I want to setup an automated way of engaging the rapid shutdown feature when a ground fault happens.
I am planning to use a normally open switch that senses for current on the ground wire and then sends an output signal. I want to connect the output signal wire to the AUX port on the CCA.
Is there a current sensor switch that can detect DC current on the ground wire and then send an output signal? My amp level is about 12 amps but voltage can be up to 600 volts.
Thanks