I have a Renogy DCC50S combined DC-DC and MPPT charge controller for my camper. I‘m about to purchase the components to make a DIY LiFEPO4 battery pack (first DIY pack for me), but wanted to double check that my charger is adequate for that battery pack.
The cells I’m planning to purchase are 4 x Eve230 Ah with a JBD 150A BMS, which I would use instead of purchasing the more expensive off the shelf SOK 206Ah battery.
The Renogy charger has a built in Li charging profile (shown in screenshot of manual below). Is that suitable/adequate for a DIY pack?
It looks like I could try to program a custom profile, but that would require purchasing the Bluetooth module, which I‘m hoping to avoid if not necessary.
The cells I’m planning to purchase are 4 x Eve230 Ah with a JBD 150A BMS, which I would use instead of purchasing the more expensive off the shelf SOK 206Ah battery.
The Renogy charger has a built in Li charging profile (shown in screenshot of manual below). Is that suitable/adequate for a DIY pack?
It looks like I could try to program a custom profile, but that would require purchasing the Bluetooth module, which I‘m hoping to avoid if not necessary.