Hi Guys
It's been a long and tiresome journey for me !!! not helped by the fact that I was born dyslexic and to compound that, living in the Uk and trying to buy stuff is near on impossible.
well, I thought I had made it and was hoping I was there!!!
I have an issue with my BRAND NEW Schneider WX+ not inverting A/C (not voltage reading at the A/C out on the inverter)
I bought a NEW schneider WX +
wired it up to four rack batteries, my first heardal was understanding ground neutral bonding. that was then sorted.
next issue was trying to buy a Schneider connect (gateway) for the inverter and a chargeverter for my rack batteries, in the Uk, eventually so was that sorted.
then came a password error on me connect (gateway), that got sorted.
so eventually I had the batteries, inverter and coms all working and inverting power.
I was testing ONLY at this stage, and I was doing this at home,
so, I packed everything up, in their original boxes and packing and transported it all to site (my workshop)
this was done by car, and I took absolute care, and with the help of one other set off hands.
just to point out, the Schnider WX+ was never taken out the box from new, (whilst testing) only once it got to site.
so, I re set everything up as I did at my home AND THE INVERER is NOT inverting?????
It turns on, it turns off, I can put it into standby and I can access the Scheider connect (gateway), BUT NO VOLTAGE reading of the A/C out on the inverter.
what have I done this time????
just to note, I tried disconnecting the Schneider gateway, so the XW+ was stand alone and not influenced by the gateway but it's still behaving the same.
It's been a long and tiresome journey for me !!! not helped by the fact that I was born dyslexic and to compound that, living in the Uk and trying to buy stuff is near on impossible.
well, I thought I had made it and was hoping I was there!!!
I have an issue with my BRAND NEW Schneider WX+ not inverting A/C (not voltage reading at the A/C out on the inverter)
I bought a NEW schneider WX +
wired it up to four rack batteries, my first heardal was understanding ground neutral bonding. that was then sorted.
next issue was trying to buy a Schneider connect (gateway) for the inverter and a chargeverter for my rack batteries, in the Uk, eventually so was that sorted.
then came a password error on me connect (gateway), that got sorted.
so eventually I had the batteries, inverter and coms all working and inverting power.
I was testing ONLY at this stage, and I was doing this at home,
so, I packed everything up, in their original boxes and packing and transported it all to site (my workshop)
this was done by car, and I took absolute care, and with the help of one other set off hands.
just to point out, the Schnider WX+ was never taken out the box from new, (whilst testing) only once it got to site.
so, I re set everything up as I did at my home AND THE INVERER is NOT inverting?????
It turns on, it turns off, I can put it into standby and I can access the Scheider connect (gateway), BUT NO VOLTAGE reading of the A/C out on the inverter.
what have I done this time????
just to note, I tried disconnecting the Schneider gateway, so the XW+ was stand alone and not influenced by the gateway but it's still behaving the same.