Looking forward, is there a shunt/meter combo that I can use as I upgrade/scale up a system? I currently have the 12V10A/25W system from Ecosomething. Sooner or later I will assembly a 24V system with proper batteries to service higher loads. Does a 'load measuring' device exist that can, for example be used on 12/24/28v systems with say 25/500/2000W panels/loads?
I'm thinking Id rather spend more now on something I don't have to chuck out because it's not man enough for a future build.
I'm thinking Id rather spend more now on something I don't have to chuck out because it's not man enough for a future build.
