Lighthouse Beacon
Following the Light
Hi Everyone,
Long time lurker here, but it's my first post. Ill attached my setup here:
I've got (24) of these panels. I had originally wanted to just run 12S and 12S to an inverter, but I am having trouble finding the right inverter. I am on a budget and this system is abit of just a fun project. My main goal was using the panels to shade my vehicles. I had an generator load panel I am going to pump into after the inverter.
I was leaning towards getting (1) 6.5KW BluePower SP6548 SOLAR INVERTER / CHARGER, and eventually adding another when I can afford it, so I can get 220v.
Is there anyway I can get all these panels into just (1) SP6548.
I think I would have to do 6 panels in series, 2 strings into input 1, then 6 panels in series, 2 strings into input 1. Would I be safe doing that? I found this in the literature. I am in South Florida, I shouldnt see freezing temps here.
Thank you so much for your time. I am trying to do my best to do my homework. I am just nervous I won't make a very good decision or I will damage something. Feel free to recommend another inverter as well. The folks at Sungold Recommended this one, but it's a POWMR with a new paintjob and I've seen some bad reviews on this rig. https://sungoldpower.com/collections/power-inverter/products/8kw-off-grid-solar-inverter-ul1741
Long time lurker here, but it's my first post. Ill attached my setup here:
I've got (24) of these panels. I had originally wanted to just run 12S and 12S to an inverter, but I am having trouble finding the right inverter. I am on a budget and this system is abit of just a fun project. My main goal was using the panels to shade my vehicles. I had an generator load panel I am going to pump into after the inverter.
I was leaning towards getting (1) 6.5KW BluePower SP6548 SOLAR INVERTER / CHARGER, and eventually adding another when I can afford it, so I can get 220v.
Is there anyway I can get all these panels into just (1) SP6548.
I think I would have to do 6 panels in series, 2 strings into input 1, then 6 panels in series, 2 strings into input 1. Would I be safe doing that? I found this in the literature. I am in South Florida, I shouldnt see freezing temps here.
Thank you so much for your time. I am trying to do my best to do my homework. I am just nervous I won't make a very good decision or I will damage something. Feel free to recommend another inverter as well. The folks at Sungold Recommended this one, but it's a POWMR with a new paintjob and I've seen some bad reviews on this rig. https://sungoldpower.com/collections/power-inverter/products/8kw-off-grid-solar-inverter-ul1741