Just unboxed two TP6048 set them up for parallel operation, went through all the settings and pushed the on button. One popped the circuit breaker from the batteries, the other is still working. I check all the settings and tried again. Popped again. I unhooked that unit from parallel connections and now I’m just running one. All good but we had no sun today so I fired up the generator. It works well but does not charge the batteries. I went thru all the settings again. No joy!
Sungold TP6048
- Thread starter Weldon73
- Start date
42OhmsPA
What's in a title?
Welcome to the forum.
They can be a temperamental inverter.
This might help with getting the generator working. I also had to connect a load, small space heater, to the generator to get the voltage to stabilize.
diysolarforum.com
I can't help with the parallel but any threads for paralleling the LVX-6048 should be helpful.
They can be a temperamental inverter.
This might help with getting the generator working. I also had to connect a load, small space heater, to the generator to get the voltage to stabilize.
Confirm my dumb moment...
Yesterday the grid was down for around 7 hours, only the 3rd time this month... Batteries were down to ~51V. (snow and no sun) I hooked the generator (5.5kw Generac gas) up to the TP6048 (LVX6048) utility input and was able to start charging the batteries after adjusting the time settings for...
diysolarforum.com
I can't help with the parallel but any threads for paralleling the LVX-6048 should be helpful.
