andyhall50
New Member
I have a new sunsynk 5.5kw inverter and 4 pylontech us5000 batteries.
They are connected with the yellow sunsync lead. This ilbns page is full of zeros, my inverter is saying my batteries are 22% full but the batteries show 4 of the 6 leds lit up.
I have gone back to the company who sold it, they finaly agree there is a problem (originally said there was no issue as the app was working).
I have read loads about the lead being the problem. I have made a network cable where pin 2 and 6 join, pin 4,5 stay connected and the others are not included. This made no difference.
I have a network cable tester. It shows pins 5 as fine, the joined pins 2and6 as fine but the pins 4 as not connected.
I have seen on ebay somebody selling a sunsynk to us2000 / us3000 / up5000 lead but mine is a us5000.
I can't be the first person to connect a sunsynk inverter to us5000 batteries and have this issue.
Please help before I pull what little hair I have out!
Thanks
They are connected with the yellow sunsync lead. This ilbns page is full of zeros, my inverter is saying my batteries are 22% full but the batteries show 4 of the 6 leds lit up.
I have gone back to the company who sold it, they finaly agree there is a problem (originally said there was no issue as the app was working).
I have read loads about the lead being the problem. I have made a network cable where pin 2 and 6 join, pin 4,5 stay connected and the others are not included. This made no difference.
I have a network cable tester. It shows pins 5 as fine, the joined pins 2and6 as fine but the pins 4 as not connected.
I have seen on ebay somebody selling a sunsynk to us2000 / us3000 / up5000 lead but mine is a us5000.
I can't be the first person to connect a sunsynk inverter to us5000 batteries and have this issue.
Please help before I pull what little hair I have out!
Thanks