Hi there, I'm wondering if its ok to use non-conductive tape to compress my cells. Let's take for example a 3P16S battery using LifePO4 prismatic cells. I'm thinking that each 3P cell can be wrapped in tape and then 16 of those tape-wrapped 3P cells then connected in series to complete the battery build. I will have them placed in a box but hoping this method is considered acceptable and would allow me not to have to use threaded rod. I'm looking at using this type of tape from amazon https://www.amazon.com/gp/product/B07HB9M3ZP/ref=ox_sc_saved_title_3?smid=A3ASOL2BV6TI90&th=1
Would appreciate this group's thoughts and feedback on this approach. Thanks in advance.
Would appreciate this group's thoughts and feedback on this approach. Thanks in advance.