RV Adventure Couple
New Member
- Joined
- Apr 3, 2020
- Messages
- 51
Is the the size of the wire on the stater or the number of wraps or something else? I against better judgement bought the tesup wind turbine and everything about the order is fucked. The wind turbine is suppose to be a 12v one but has a 48v sticker and when I connect my multimeter to 2 of the wire and spin it I only get 40v then switch the positive lead to the other wire and I get 40v, if I spin the turbine faster the multi meter cuts out after 40v and doesn't read anything. The charge controller was a nightmare after opening that up I saw the PCB and the DC pos and neg wire coming off that, the wires had to be 14 gauge. In saying that there's no way it is producing what they claim which is 940 watts at 110v AC which if I am right is 8.5 amps which converted to DC if I am right is 86 amps DC so therefore the DC wires coming off the PCB are way too damn small.