Hi Everyone
I have a 12.8v 4s 190ah battery... well 2 390aH Lifepo4
120 overkill bms
3.2v nominal
3.65 max / 14.6v pack
190aH
1c discharge rating
the inverter i have has an AC transfer switch and charger built in.
it only has 4 fixed charging profiles, which are:
Will's published profiles are:
12V LiFePO4 Battery w/ BMS:
Is the Flooded Profile OK or will that cause some type of issue? better option? There is also a Solar charge controller in the mix that is configurable,,
Thanks in advance!
I have a 12.8v 4s 190ah battery... well 2 390aH Lifepo4
120 overkill bms
3.2v nominal
3.65 max / 14.6v pack
190aH
1c discharge rating
the inverter i have has an AC transfer switch and charger built in.
it only has 4 fixed charging profiles, which are:
Battery Type and Voltage Setting (Bulk/Absorption/Float) |
Flooded: 14.4V / 14.4V / 13.5V |
GEL: 14.2V / 14.2V / 13.8V |
AGM: 14.3V / 14.3V / 13.4V |
Fixed: 13.5 Vdc fixed voltage |
Will's published profiles are:
12V LiFePO4 Battery w/ BMS:
- Absorption: 14.5V
- Float: 13.6V
- Inverter Cut-off: 10.7V-12V (depending on size of load and voltage drop etc)
Is the Flooded Profile OK or will that cause some type of issue? better option? There is also a Solar charge controller in the mix that is configurable,,
Thanks in advance!
Last edited: