diy solar

diy solar

Wind turbine

jonwhite

New Member
Joined
Sep 19, 2023
Messages
1
Location
Leicester
I have a 500w vevor wind turbine that I have just fitted, the 3 wires that come out of the turbine go to a controller but I don't seem to have any output.
Could someone please advise how and what to check.
I have 5 x150a batteries connected together that I hope to keep topped up.

Thanks in advance
 
Doesn't address your issue, but worth a quick glance to establish expectations on wind:

 
I have a 500w vevor wind turbine that I have just fitted, the 3 wires that come out of the turbine go to a controller but I don't seem to have any output.
Could someone please advise how and what to check.
I have 5 x150a batteries connected together that I hope to keep topped up.

Thanks in advance
The blades need to spin REALLY fast to get appreciably measurable output, and it'll be 3 phase AC output coming from the turbine, so make sure your meter is on the right setting. The AC gets rectified by the controller into usable DC from there to feed the batteries.
 
Back
Top