LuisEPS
New Member
Hello!
We have installed a system consisting of 2 x XWPro 230V in parallel (Single phase installation). Inverters have been updates to latest firmware v2.06 and gateway to the latest version at the website (1.18).
The system struggled to work properly and synchronize from the beginning, after much back and forth with the Advanced AC settings Voltage calibration the load sharing started working but the transfer time from grid tied to offgrid is awfully slow. We have tried factory reset and reloading the latest firmware at the inverters without success.
Have anyone experienced this same issue? we have ample experience with XW+ which never displays this behavior's, transfer is quite quick.
The transfer is so slow that TV's and other electronics are switching off.
We have installed a system consisting of 2 x XWPro 230V in parallel (Single phase installation). Inverters have been updates to latest firmware v2.06 and gateway to the latest version at the website (1.18).
The system struggled to work properly and synchronize from the beginning, after much back and forth with the Advanced AC settings Voltage calibration the load sharing started working but the transfer time from grid tied to offgrid is awfully slow. We have tried factory reset and reloading the latest firmware at the inverters without success.
Have anyone experienced this same issue? we have ample experience with XW+ which never displays this behavior's, transfer is quite quick.
The transfer is so slow that TV's and other electronics are switching off.