dudeinthewoods
New Member
- Joined
- Apr 7, 2020
- Messages
- 111
Ok, so I've got sets of 6 24v panels which is 144v total.
SCC says 160v (I forget but around there it's a bit above 144v)
Now when I check the panels my volt meter shows 32v or something like that.
Obviously 6 panels at 32v is more than my SCC can handle but is that the right way to determine how much voltage they're receiving?
Is it fair to call these 24v panels and say 6 of them is within my SCC spec? Not sure what voltage matters.
It's a makeskyblue controller and so far has been great.
Thanks!
SCC says 160v (I forget but around there it's a bit above 144v)
Now when I check the panels my volt meter shows 32v or something like that.
Obviously 6 panels at 32v is more than my SCC can handle but is that the right way to determine how much voltage they're receiving?
Is it fair to call these 24v panels and say 6 of them is within my SCC spec? Not sure what voltage matters.
It's a makeskyblue controller and so far has been great.
Thanks!