wild01

yes but in negative numbers, so I'm wondering if the wires are passing through the sensors in the correct direction. with my clamp meter...

@Will Prowse PLEASE review these.

I have negative infinity need for this, but I want to buy it. What is wrong with me?

3.00 star(s) doesn't run in open office

what about the growatt 6000t Everytime I reach out signature responds initially and then ghosts me

I was very excited to see this product, but at that price point I would totally lose interest.

https://shop.pkys.com/Blue-Sea-3131-Surface-Mount-Enclosure-for-two-Circuit-Breakers_p_2727.html this should work

where did you get that rec/filter setup. been considering a similar setup for generator charging

I know this is an old thread, but I was just fighting this same thing on an lv5048, and came up with a unique solution. Thought i...

hope you don't use them inside, found that youtube comment: "One of these OLPZ batteries (12v-200Ah) set my basement on fire. Several...

if you want to make sure the charger is dumb enough, just use jumper cables from running car to your battery. pos to pos/ neg to neg.

Or bench power supply

sla charger should work, but it will need to be a "dumb" charger. smart chargers read the batteries voltage before outputting a charge...

the 300ah 24v looks like it had 2x68ah (8s2p) pouch cells from 2019 that only tested @100 ah total. no compression thin wires cheap bms...