Recent content by tsenator

OMG ! I LOVE YOU GUYS ! Yes that is the answer ! I never knew that you could scroll through those , I touched the screen everywhere and couldn't do it. Thank you so much for the info - hopefully this thread will help others !

Thanks - Yes I paid for the full version. I'm very surprised no one else has tried to use this feature. Having an alert for overvoltage / undervoltage or whatever come to your phone (obviously when you are in bluetooth proximity) seems like a REALLY great feature . My use is as a...

Hi, I have a 100A JBD BMS using the Xiaoxiang App on my IPhone. Everything works fine, but I can't seem to change anything on the "Notifications" page. I can enter a number (in this case notify if cell less than 2.875 volts and then if less than 2.86 volts) but I cannot change the 'greyed out'...

Interesting . Looking other peoples bluetooth screenshots of their BMS it says "SH39F003" in the battery code section .... but mine (2nd screenshot) shows Battery Code of "20200306" interesting

YM58 - after entered 1,2,3,4,5,6 try hitting set AGAIN. It always have to hit "Set" again after I type in the " 1,2,3,4,5,6" Yes. Parameters stick when I have 65535 in sleep timer. Here is my software . I’m on an iPhone. I just hate this flaky software. It’s driving me batty too. I...

Help - I cannot get PC sinowealth software to read any parameters of Daly 30A BMS , but I can see "PC Master" gets reading from the Daly BMS so I know serial link works. (The BMS is Model Number BMS-ST030-303E) I've downloaded multiple versions and all sorts of parameters and reloaded and...

Yes I set a lot of parameters in Bluetooth app. Here is a screenshot of the app on my iPhone when I was changing the actually SOC of my batteries from 86% (which was wrong) to 99%. After I hit the “green set” it asked for a 6 digit password - just type 1,2,3,4,5,6 and then hit set again and...

Yes I am able to modify all the parameters now. Seems to work fine but some things like SOC readings drop over a few days even if there is no load and Amps not read under 1.2 Amps by Daly BMS. Working on those issues now

Texas-Mark, Thanks for that update. I have had the same thing happen to me just this past week. I have a small prototype setup 4S with Daly on 4 "32700" LifePo4 batteries. (Supposed to be 7.2 AH -- closer to 5.3 AH). I left the little prototype set up last friday @ around 65% SOC when I...

Thanks. I’m away at the moment. I’ll try and order a PC UART cable and downloads that software and try that. Too bad I couldn’t DI ir with Bluetooth software.

I was wondering if anyone else has noticed the phenomenon I am experiencing . I bought a small LifePo4 setup to get familiar with Lithium . I purchased 4 small 7200 MA-Hour batteries and a 30 Amp Daly Smart BMS. After some time I messing around I finally got the BMS 'started' and the...

Funny, I just had the same experience this weekend. When I first wired my 4S1P Daly BMS I could only get 7.7Volts out of the P- lead (even though I had a full 13.4V across the 4 LifePo4 batteries in series aka at the B- lead) For reference I have a (4) 7200MA LifePo4's and a 30 A Daly Smart...

Thank you for the pic.

I might just do that later after I get my big prismatic lifepo4 cells and tie it into an inverter with a 1200 watt hair dryer for a while. Curious this hasn’t been brought up before by others here. This is a common way these popular BMS’s are cabled.

I have 2 Questions on connecting current carrying wires for JBD BMS (in this case 100A Smart BMS) - First Question -- How do you people wire these to the battery terminals or negative output battery post ? They are definitely too short as is to reach the terminals in my case I am using 100+AH...