If I setup one set of 2x6500ex in 240 split phase with AC OUT HOTS feeding one load center, AND another set of 2x6500ex in 240 split phase again with AC OUT HOTS feeding different load centers (two this time), my understanding is I do NOT need to connect the current sharing cable in this configuration. AND the serial comm cables can be connected like if it were only 2x6500ex 240 split phase, done on each set…correct?
For the 6x lifepower4 batts, in this way though I would NOT have a master inverter, if set to eg4 for the batt comm, run the batt charging for all FOUR inverters. I would have to config a set of inverters manually for the batt charging…correct?
RE, solar assistant, I would have to connect another usb to rj45 for sa to report on the other inverter set…correct?
So I can do it this way, or simply connect the four up like how the manual says but they would just go to their separate load centers and have the current sharing cable connect, etc.
Just want to confirm I have all this correct and am not missing a problem somewhere. Can someone confirm or correct? Thanks.
For the 6x lifepower4 batts, in this way though I would NOT have a master inverter, if set to eg4 for the batt comm, run the batt charging for all FOUR inverters. I would have to config a set of inverters manually for the batt charging…correct?
RE, solar assistant, I would have to connect another usb to rj45 for sa to report on the other inverter set…correct?
So I can do it this way, or simply connect the four up like how the manual says but they would just go to their separate load centers and have the current sharing cable connect, etc.
Just want to confirm I have all this correct and am not missing a problem somewhere. Can someone confirm or correct? Thanks.