Found my new eg4 wall mount batteries in the red today

I installed my inverter and batteries Monday afternoon and stayed up all night wiring everything up. Tues. afternoon double checked my work and fired it up no solar yet lots of settings different com cables and I'm not great with reading compression then the double wouldn't connect with the router and then Wednesday afternoon I seen the batteries were red so I checked the display they were down to just above 10% so I force charged them to get out of the red. Apparently I had been running on battery without solar.
So I got after it yesterday afternoon and through the night got the dongle thing working apparently it didn't like the T-Mobile router but seems to favor the netis
Also mowed some grass built a temp solar array did some welding on a trailer for a mini array and now we're making power and charging batteries And I'm tired

not to bad for first day of producing power this is less than half of the panels I purchased plus 20kwh of server rack batteries. I did a load of laundry this afternoon as power production was dipping below 3k to test effect on batteries soc which was 98% when drying started. In the future I will conduct these high drain activities during peak production hours.

I like your ground mount. Looks a lot like mine.

Nice when you have the watts inbound.

I figured why wait took me less than an hour to put that together

Did a sound test. Underload the inverter is not as loud as AC right next to it.
I originally planned getting the 6000xp and server rack batteries but after much research and planning this seemed to be the best route.
This panel feeds 4 sub panels consisting of 3 steel buildings 2 metal sheds a camper and a pump house.
As Will Prowse would say anything less would be illogical.
Every time he says that I think of Spock