Which balance lead wire on the JK active balancer do you connect and disconnect with the relay on the XY-CD60L to turn the balancer on and off?connected XY-CD60L yesterday with my 1A JK active balancer which i have for a few years now connected to my old BYD batteries from battery hookup. worked as expected. tuned on at settings in the board 53.5v (it shows about 1v higher than the actual voltage about 52.5v) and turn off at 52.5V (actual battery voltage about 51.5v). my batteries at not at best of health capacity wise and they are used/abused batteries. i can try to charge up to 55v but drops to 53.3v (i would estimate about 80% capacity) within 20 minutes of start of discharge. i remember vaguely at the time it said to expect about 2000 cycles from the batteries, i have it connected for past 3 years now an i feel the pinch of it discharging quickly for my loads.