No data charting.
It looks like the Load data for one output leg is not showing up. It’s ok on the 6000ex inverter display.
Yeah. The inverter model is correct.
Solar Assistant Wish list, Bugs and Issues.
- Thread starter robby
- Start date
It looks like the Load data for one output leg is not showing up. It’s ok on the 6000ex inverter display.
Are you using the micro USB port? Those can be finicky and have been known to fail. The RS232 port on the right with a cable from Signature Solar should work well. A cheap or wrong cable at the RS232 port could cause damage to the com of the inverter or SA. I had a problem on one of my LV6548’s and wouldn’t communicate with the SA. I disconnected the cable, restarted the inverter, THEN reconnected the cable and it was working.
No, I’m using the RS-232 cable.
My SA was previously working without issues prior to the firmware update.
Adam De Lay
Solar Wizard
Since you mentioned recently updating the firmware, I’m wondering if something changed in the firmware that stopped that data from being output so that SA can utilize it.
I wonder if anyone else has the same issue with the same version of the 6000 firmware?
I just received a reply from Solar Assistant and was advised to install the Beta version to resolve this issue.
I’ll install Beta once I’m approved and I’ll report back.
Cool !
Adam De Lay
Solar Wizard
That’s great!
Still makes me wonder if it was something in the 6000 firmware that had to be fixed in SA though.
Yahooo!?
wattmatters
Solar Wizard
Just remember, it's a one way street. No turning back.
That’s the only thing that’s holding me back from the Beta
Quattrohead
Solar Wizard
If you leave the beta program, you will not be able to downgrade to the latest stable release. You have to wait for a stable release to be newer than your current beta release. To leave the beta program, select "leave beta".
Quattrohead
Solar Wizard
I wouldn't worry about it too much, beta's have been pretty stable from what I have seen and read.
Muzzammild36
New Member
How do i achieve this please?
How do i connect my Deye inverter and JK BMS to SA and HA?
Configuring Deye/SunSynk/Sol-Ark inverter
How to configure a Deye/SunSynk/Sol-Ark inverter in SolarAssistant.
[/QUOTE]
See the link above but start on the homepage and tap on the hamburger, help then the up/down arrows to explore some. https://solar-assistant.io/#inverters
Last edited:
You need a module and adapter for each JK bms. Link to directions;
wildbillpdx
Solar Enthusiast
Work with EG4 to eliminate all the b.s. about SA frying inverters. It is just ridiculous.
I asked for email monitoring in Jan 2022!
Between Victron Venus OS and Home Assistant i've got it covered now, but nicer to catch issues on the initial monitoring platform though
Contacted support today, as I didn't see a way to alter time of use times for Deye/Sunsynk inverters via MQTT (charging levels and other settings can be adjusted, but not the times unfortunately). Anyone got a workaround, perhaps via the WebSocket API?
Similar threads
