To get the document, click on the orange
button at the top of the page.
This document summarizes the pin-out and functions of the Electrodacus SBMS0 I/O pins as well as other useful info on wiring up the device. Some of the information I could not find in the manual and had to contact Dacian to figure out.
The chart below is in the download. However, the download contains a lot of other information as well.
As with any resource I develop, reviews, corrections and suggestions are welcome.
Edits:
This document summarizes the pin-out and functions of the Electrodacus SBMS0 I/O pins as well as other useful info on wiring up the device. Some of the information I could not find in the manual and had to contact Dacian to figure out.
The chart below is in the download. However, the download contains a lot of other information as well.
As with any resource I develop, reviews, corrections and suggestions are welcome.
Edits:
- Updated descriptions of the Ext I/O types.
- Added better description of ADC2 and ADC3
- Added info about the 'left side' connector and the green connector on the WiFi/USB adapter board.
- Added comments about shunt placement in relation to fuse
- Added sample designs.
- Corrected PV shunt position in sample design2
- Added information and diagram for how to wire the shunts.
- Added information on ways to wire the ExtIO pins to devices.
- Updated information about the part # of the EXTio output drivers.
- Corrected & updated sample designs
- Added sample design using DSSR20s
- 3/13/21 - Updated Ribbon cable function chart.
- 3/15/21 - Corrected pin number in note 5 of 16pin Green Connector Chart.