bruce_loco
New Member
- Joined
- Mar 30, 2022
- Messages
- 57
Hi
I want to use 12v solar water pump to drain water from a well
The battery system i want to use is a 16v capacitor bank with a dc-dc converter to 12v
A 2nd motor 12v motor will be wired to pump that water to a small irrigation system.
Since this is super caps there is no charge controller(except for the regulators on the boards)
but how do i do the input vs the output side of the equation?
Is it
solar - 12v connects to a general bus that connects to the charge controller connected to the dc dc converter?
something like this?
I want to use 12v solar water pump to drain water from a well
The battery system i want to use is a 16v capacitor bank with a dc-dc converter to 12v
A 2nd motor 12v motor will be wired to pump that water to a small irrigation system.
Since this is super caps there is no charge controller(except for the regulators on the boards)
but how do i do the input vs the output side of the equation?
Is it
solar - 12v connects to a general bus that connects to the charge controller connected to the dc dc converter?
something like this?