Vincenttor
New Member
Well first of all i am asking this question for my dad, he owns a RV and put a new battery in the RV as household appliance battery.
The batteries are bought on aliexpress, those are the known blue cells 4 x Lifepo4 and should be 320Ah each.
The BMS he is using is a Dalu 200A BMS.
My dad and his neighbour have done the same steps, seems to work good in the neighbours his RV but when the voltage drops below 11.6 V its all dark and need some time before it is charged/working again.
My question is, since we can't get a grip on the seller of the aliexpress batteries ( store is 404 error now so gone with the wind)
Are these the right settings for the BMS or can we lower it , or would this damage the cells.
Anybody that could push us in the right directions ?
Thanks in advance
Here are some screenshots of the BMS:
The batteries are bought on aliexpress, those are the known blue cells 4 x Lifepo4 and should be 320Ah each.
The BMS he is using is a Dalu 200A BMS.
My dad and his neighbour have done the same steps, seems to work good in the neighbours his RV but when the voltage drops below 11.6 V its all dark and need some time before it is charged/working again.
My question is, since we can't get a grip on the seller of the aliexpress batteries ( store is 404 error now so gone with the wind)
Are these the right settings for the BMS or can we lower it , or would this damage the cells.
Anybody that could push us in the right directions ?
Thanks in advance
Here are some screenshots of the BMS: