Axpert king II , Daly Smart Bms Comunication

[lipastas]

Hello Peeps,
I have two Axpert king II in parralel connected to two parallel 16s 48v different capacity Lifepo4 battery.
I have the new version of daly bms with 15A parallel kit .
I need to check if the parralel kits are doing their jobs because there's nothing to see there and what to know what's the battery type / Protocol that comunicate with daly Bms .
Attached bellow is a tutorial how to connect.
Regards.

 

[kundip]

Probably of no use but I found this.

CC are not available let alone some in English

 

[Yoss]

Hello Peeps,
I have two Axpert king II in parralel connected to two parallel 16s 48v different capacity Lifepo4 battery.
I have the new version of daly bms with 15A parallel kit .
I need to check if the parralel kits are doing their jobs because there's nothing to see there and what to know what's the battery type / Protocol that comunicate with daly Bms .
Attached bellow is a tutorial how to connect.
Regards.

Hello, lipastas!
Thanks for the info, it was a great help for me. But, don't you by any chance how could I connect 2 Daly BMS to a Voltronic inverter?
Thanks,
Regards,
Yoss

 

[Damon YIP]

Hello, lipastas!
Thanks for the info, it was a great help for me. But, don't you by any chance how could I connect 2 Daly BMS to a Voltronic inverter?
Thanks,
Regards,
Yoss

Voltronic i suggest use BMS set（need interface board ） Pylon 485 to parallel communication

 

[Kamil said]

Voltronic i suggest use BMS set（need interface board ） Pylon 485 to parallel communication

Has anyone contacted Daly BMS to Voltronic inverter?

 

[sanitariu]

If someone has Daly BMS with CAN/RS-485 can I ask for voltage measure of all pins ?

 

[Damon YIP]

Has anyone contacted Daly BMS to Voltronic inverter?

Sure, use LIB 05 or PYL 05

 

[Damon YIP]

If someone has Daly BMS with CAN/RS-485 can I ask for voltage measure of all pins ?

Datasheet will show