Not sure if my expectations were too high, but every cell is 3.345 to 3.350 (yes my meter is calibrated)
And yes I have double checked the crimps on the balance wires, they are solid. (even though in my head this shouldn't matter w/ balancing turned off?)
Concerned about the 58mv difference between cell 7 and 12.
Has anyone figured out how to calibrate these?
I haven't seen anyone else complaining about cell 7 and 12 specifically, so I'm assuming the device isn't powered from those lines?
I am powering the BMS from the battery, so I think that explains the BMS reading a little low on cell 16?
Balancing is currently disabled.
And yes I have double checked the crimps on the balance wires, they are solid. (even though in my head this shouldn't matter w/ balancing turned off?)
Concerned about the 58mv difference between cell 7 and 12.
Has anyone figured out how to calibrate these?
I haven't seen anyone else complaining about cell 7 and 12 specifically, so I'm assuming the device isn't powered from those lines?
I am powering the BMS from the battery, so I think that explains the BMS reading a little low on cell 16?
Balancing is currently disabled.