AgroVenturesPeru
New Member
- Joined
- Sep 19, 2020
- Messages
- 411
I posted this on the victron forums, but I'm still not sure if I can just use my smartphone to do what I need to do...
I have a solar kit I bought recently with a Multiplus 48/5000/70 and a SmartSolar 250/100. The system has a CerboGX and Touch 50. The battery bank is 4 Pylontech US3000.
I was reading the Victron-Pylontech compatibility article, and just watched a webinar on the topic, but I'm still unclear.
To make sure all my Victron components are configured properly according to what the batteries need, can I just use the VictronConnect app via my smartphone? Does this operate via some sort of bluetooth connection internal to the CerboGX?
Or do I need to buy the Smart Dongle or MK3 USB separately?
Doesn't the CerboGX and Touch50 replace the need for the VictronConnect app or at least replace the need for the SmartDongle/MK3-USB?
Can I modify the parameters (float charge voltage and change 50Hz frequency to 60Hz frequency) with just my smart phone equipped with 4G internet connection, hotspot output, and bluetooth capability?
I have a solar kit I bought recently with a Multiplus 48/5000/70 and a SmartSolar 250/100. The system has a CerboGX and Touch 50. The battery bank is 4 Pylontech US3000.
I was reading the Victron-Pylontech compatibility article, and just watched a webinar on the topic, but I'm still unclear.
To make sure all my Victron components are configured properly according to what the batteries need, can I just use the VictronConnect app via my smartphone? Does this operate via some sort of bluetooth connection internal to the CerboGX?
Or do I need to buy the Smart Dongle or MK3 USB separately?
Doesn't the CerboGX and Touch50 replace the need for the VictronConnect app or at least replace the need for the SmartDongle/MK3-USB?
Can I modify the parameters (float charge voltage and change 50Hz frequency to 60Hz frequency) with just my smart phone equipped with 4G internet connection, hotspot output, and bluetooth capability?