pterrydactyl
New Member
I have a Rich Solar kit with 2-100 watt panels and 30 amp controller. I want to add 2-200 watt panel into the system. Run them in series? Suggest a wiring scheme or diagram. Increase MPPT to 40 amp?
Connecting 100 watt and 200 watt panels
- Thread starter pterrydactyl
- Start date
What voltage battery?
pterrydactyl
New Member
12 volt. Total 600 watts to a 200 amp battery.
Ok, so at 12 v 600W is 50 amps. Make sure your controllers are rated over this level.
pterrydactyl
New Member
Wii increase MPPT to 60 amp. Ok?
If you have a 30A, an additional 40A should be fine. You can connect two controllers to a bank…
pterrydactyl
New Member
100 watt kit came with 30 amp controller and the 200 watt kit comes with a 40 amp controller.
pterrydactyl
New Member
Thank you all for your remarks, comments, instructions and ideas. I’ve decided not to mix panels and have also decided to go with an additional 4 x 100w panels from the same company this is for my travel trailer. Currently wait for them to arrive.
Similar threads
