harrymanimus
New Member
- Joined
- Apr 3, 2021
- Messages
- 49
I purchased a Jingmaida 1200w 92v 13a switching power supply to charge my Ecoflow Delta Pro. The plan was for extended power outages to use an inverter connected to my truck to send AC to the power supply, take the DC output into the xt60 port of the delta pro. I do this because the inverter on the auto puts out a floating neutral with 60 volts to ground and that seems to be passed through in the Ecoflow and I don’t want that going into my house electrical panel. Seems questionable to do that based on previous posts.
So I did the power supply setup, but I’m only getting around 700w of DC power into the Ecoflow. What it seems like is that the EcoFlow thinks its connected to a cigarette adapter instead of a solar array and seems to be limiting it to 8a when I look in the EF app. Think that is what is happening? If so, ideas on getting the full 13a out of it?
Thanks
So I did the power supply setup, but I’m only getting around 700w of DC power into the Ecoflow. What it seems like is that the EcoFlow thinks its connected to a cigarette adapter instead of a solar array and seems to be limiting it to 8a when I look in the EF app. Think that is what is happening? If so, ideas on getting the full 13a out of it?
Thanks
Last edited: