Hello,
So I received my brand new 6000xp and connected it to my 5 LLs. All the batteries were fully charged as they were constantly used for about two years until a week and a half ago when I decided to upgrade from a Eg4 6000ex to an Eg4 6000xp.
When I use close loop, the state of charge reported on the inverter does not match the state of charge reported on the LLs screen. All my batteries on their screens report 99% soc. Now on the inverter thestate of charge reports as 78% soc. I can see 500amp total capacity which makes me think all comms are reporting to the inverter. But why wouldthe LCDs report a fully charge battery and the inverter report 78%?
I was told at some point from a SS tech that the reported LCD soc does not come from the BMS and their could be discrepancies between comms and the LCD.
So I received my brand new 6000xp and connected it to my 5 LLs. All the batteries were fully charged as they were constantly used for about two years until a week and a half ago when I decided to upgrade from a Eg4 6000ex to an Eg4 6000xp.
When I use close loop, the state of charge reported on the inverter does not match the state of charge reported on the LLs screen. All my batteries on their screens report 99% soc. Now on the inverter thestate of charge reports as 78% soc. I can see 500amp total capacity which makes me think all comms are reporting to the inverter. But why wouldthe LCDs report a fully charge battery and the inverter report 78%?
I was told at some point from a SS tech that the reported LCD soc does not come from the BMS and their could be discrepancies between comms and the LCD.
Last edited: