ChillnGrill
Solar Enthusiast
I made a call to SS 2 weeks ago about my batteries over charging using coms. I was told to put in use mode and set charge to 55v and float 54 for two weeks to let the BMS learn. Also put a high draw on the batteries every morning for those 2 weeks to get voltage below 52v as instructed . Well today after switching back to eg4 mode batteries went over 57v and had cell over voltage, charging MOS off shutdown, cell over voltage alarm, total overvoltage alarm again. I feel like the last 2 weeks were a waste of time I should call SS again but I have very little service at my off grid place. Maybe someone on here from SS could tell me what I should do now.