Hi all,
Running into some battery issues with our current set up
Growatt 5000 es,
1x G4LL LiFePOWER 4 battery (Runs great) (this battery but no LED screen) (Picture Battery A)
1x LiFe POWER4 battery - Running into issues Link (Battery B)
Issues with the Eg4 battery include:
Unbalanced charging - Some times, not always, my G4LL battery will charge fully but the SOC on the EG4 will not charge. Or the charges will be unbalanced. SHouldnt they charge at the same rate?
Error message then shut down: randomly through out the day, we get an alarm then the battery will stop working. We have tried resetting it but it doesn't seem to work.
Sudden Drop of voltage/charge - not sure if this is battery related, but batteries were sitting at 75-80%, then they suddenly shut off and dropped below 20%. this was at the end of the day.
Attached is the set up. Our main battery is the G4LL (Battery A) ID assignment dials are set Dials are set to (On, on, On, off)
Battery B, ID assignments are (On, On, Off, ON)
I have read also on a forum that I Should NOT connect the battery's together with a communication cable? anyone care to explain? link to discussion
Running into some battery issues with our current set up
Growatt 5000 es,
1x G4LL LiFePOWER 4 battery (Runs great) (this battery but no LED screen) (Picture Battery A)
1x LiFe POWER4 battery - Running into issues Link (Battery B)
Issues with the Eg4 battery include:
Unbalanced charging - Some times, not always, my G4LL battery will charge fully but the SOC on the EG4 will not charge. Or the charges will be unbalanced. SHouldnt they charge at the same rate?
Error message then shut down: randomly through out the day, we get an alarm then the battery will stop working. We have tried resetting it but it doesn't seem to work.
Sudden Drop of voltage/charge - not sure if this is battery related, but batteries were sitting at 75-80%, then they suddenly shut off and dropped below 20%. this was at the end of the day.
Attached is the set up. Our main battery is the G4LL (Battery A) ID assignment dials are set Dials are set to (On, on, On, off)
Battery B, ID assignments are (On, On, Off, ON)
I have read also on a forum that I Should NOT connect the battery's together with a communication cable? anyone care to explain? link to discussion