I'm setting up an EPever XTRA 30a charger for LiFePo but would like to use some very conservative settings while I get my feet wet.
The manufacturer of my battery specifies 56v as the charge voltage for the unit. It's a 16S14P battery rated at 51.2v nominal, 42Ah.
Do these values look OK to get started with? Anything you would change?
The manufacturer of my battery specifies 56v as the charge voltage for the unit. It's a 16S14P battery rated at 51.2v nominal, 42Ah.
Do these values look OK to get started with? Anything you would change?